|
MILLER G-TooL™
Geometry
TooL
|
BILLET
ALUMINUM |
ENGRAVED
Markings |
|
Black
Anodized |
Dual-End
12-Point Adjuster |
|
Full Load
Pushrod |
DETAILED INSTRUCTIONS |
|
MPG "GT-3X" Series Racer NET: $208.00
Extra Adjustable
Push-Rods: $20.00 |
The Patent
Pending Miller G-TooL™
leaps beyond anything previously offered by any other manufacturer.
Made for MEI PRO-STUD™
(above) and PVS PA Series, the Miller G-TooL™
not only adjusts the rocker arm correctly for ANY Net valve lift from the CLOSED valve position;
but it precisely CONFIRMS the accuracy of the STUD angle in the head, to
alleviate any angular errors from the head manufacturer.
|
MPG-Stud ™
It’s one thing to have a better
idea, it’s something else to make it easy to use. Like the innovation of
30 years ago in developing MID-LIFT geometry, applying new and easy
methods for the engine builder to correctly install rocker arms has always
been our goal. The Miller G-TooL™ accomplishes this,
and more.
The Miller G-TooL™
is precision machined from BILLET Aluminum alloy, BLACK Anodized and CNC
ENGRAVED with Chevrolet and Ford Specification Valve Lift Standards, used
in conjunction with 4 Page Instructions. This tool will stay in your tool
box for YEARS... except the many times you'll be using it.
This makes setting geometry deadly
accurate and quick, and once used, you'll understand how critical
Precision Geometry really is. You'll never settle for anything less.
(Patents Pending)
Fits PVS Stud Mount
Rockers
(Also
Available for PRO-STUD.
|
FORGET "Plastic Pushrod checkers" and FORGET "Stand
Checkers!" FORGET anything that says it sets rocker geometry by
centering the roller atop the valve. FORGET everything that sets
geometry without using the NET VALVE LIFT! There is no way on the
planet that you can have correct rocker arm geometry if you do NOT set
the rocker's position for a specific NET valve lift. Period. Jim
Miller illustrated what was important in setting rocker arm geometry,
and how to set rockers using the valve spring retainer, in published
articles during the mid-1980's, including in the Lunati Catalog and
original Crane/Lunati rocker instructions from 1988. It remained in the
Lunati Catalog for more than a dozen years, even after Holley bought the
company.
The MILLER G-TooL™
goes beyond anything previously offered. It sets rocker geometry for
your exact net valve lift, and it does it from BOTH:
CLOSED VALVE, and MID-LIFT. Plus, it corrects for any
deviation in your rocker stud's accuracy! With multiple Patents Pending,
it could only have come from the founder of Precision Geometry.
MILLER PRODUCTS GROUP
1777 Blount Rd. #501
Pompano Beach, FL 33069 USA
954-978-2171
"MID-LIFT" & "PRO-SHAFT" are ® Registered Trademarks
of MILLER ENGINEERING INC; Copyright © MMIII - MMX JM Miller
| |
