Reinstall the adjustable pushrod, rocker arm, G-TooL Adjuster and the MEI G-TooL™
as you did in STEP 1, only using the .500 VL SIDE. This SECOND SIDE MEASUREMENT is with the .500" VL side, and since the
previous measuring with the .700" VL side uses a shorter push-rod setting, you
will once again have a GAP behind the adjuster that requires you lengthen the
G-TooL Adjustable push-rod to close. NOTE: You do NOT need to have the double
sided G-Tool ADJUSTER tight against the rocker, as you will need to leave room
for the rocker arm to be elevated by the extending push-rod.